VISTA OUTDOOR SALES LLC

This heavy-duty cast-iron pot holds up to 10 pounds of molten metal. It features a flat bottom for stability bail handle pouring spout and a tab lifter for gripping with insulated tongs or pliers.

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...

RCBS� Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and Rotary Case Trimmer�2 only.

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...

RCBS� 5-Station Shell Plates properly align the case with the reloading die during reloading. They�re built from hardened steel and capture 0.125-inch of the case head for proper SAAMI headspacing...

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...

RCBS� Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and Rotary Case Trimmer�2 only.

RCBS� 5-Station Shell Plates properly align the case with the reloading die during reloading. They�re built from hardened steel and capture 0.125-inch of the case head for proper SAAMI headspacing...

RCBS� Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They�re sized to fit specific case...

CASE TRIMMER PILOT .37 CALIBER

RCBS� Case Trimmer Collets work like a draw collet on a lathe. They secure cases for trimming to length. Note: For use with Rotary Case Trimmer and Rotary Case Trimmer�2 only.

The Small Base Sizer Die is for bottleneck type cases used in tight-chambering semi-automatic pump or lever-action firearms. The sizer resizes cases below SAAMI minimums reducing the shoulder and...

This two-die set is for bottleneck type cases used in tight-chambering semi-automatic pump or lever-action rifles. It consists of a Small Base Sizer with an Expander-Decapping Unit and Regular Seater...

CASE TRIMMER PILOT .36 CALIBER

The 3-Die Roll Crimp Set is for loading straight-wall cartridges. Its steel Sizer Die sizes the case and de-primes. Note: Cases must be lubricated. The Expander Die expands the case to the proper...

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...

This protective Dust Cover is compatible with the RCBS� 5-0-2 and 5-0-5 scales. Vinyl construction folds easily for storage.

Trim a bottleneck case once�and never trim again with the X Die Full Length Sizer. Its specially designed mandrel has an expander ball and decapping pin attached. The patented design eliminates the...

RCBS� 5-Station Shell Plates properly align the case with the reloading die during reloading. They�re built from hardened steel and capture 0.125-inch of the case head for proper SAAMI headspacing...

The Micrometer Adjustment Screw is the secret to faster reloading. Add the it to the Uniflow� Powder Measure and reloaders can record precise settings for their powder charges. Determine the load...

Burrs left on the inside of the flash hole during manufacturing can cause erratic ignition. This handy tool automatically locates the hole and quickly removes the burr. A self-centering pilot collar...

This two-die set is intended for reloading bottleneck cases and consists of a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die...