LEE

Lee 338 win mag case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.480 to 2.500 inches.Capacity: 1...

The lee reloading stand is for the reloader with limited working space or an overwhelmed workbench.The sturdy powder coated steel stand places your press at the perfect counter stool or standing...

Quick change shell plates allow you to change from one caliber to another in a matter of minutes.When changing to another caliber with a different primer size, be sure to order the pro 1000 primer...

Lee's lube & size kit allows you to lubricate and size cast bullets.It can also seat and crimp gas checks.Intended for use on single stage presses only, the sizer die has standard 7/8 x 14...

Lee's auto prime hand priming tool is a fast, safe and effective way of priming cases.It uses inexpensive lee hand prime shell holders only.The unit includes one folding primer tray, one small...

Lee's pro 4000 kit is easy to use with no adjustments.The modular construction allows as much or as little automation as the operator desires with no adjustments.Cartridge changeover in seconds,...

Lee's pacesetter 2-die set includes full length sizing die, bullet seating die, universal shell holder, powder dipper and instructions/load data.Type: Pacesetter LP Rifle Dies w/Shell HolderCaliber:...

Lee's pacesetter 3-die set includes a full length sizing die, easy adjust dead length bullet seating die, factory crimp die, universal shell holder, powder dipper and instructions/load data.Type:...

Lee's collet die uses a collet to squeeze a mandrel, creating a precisely aligned case neck while reducing run out.Sizes just the neck and requires no lubrication.Type: Collet Neck Sizing Rifle...

The accessory items to fit the pro1000 includes the large case feeder, small case feeder, rifle case feeder, extra case feeder tubes and the case collator.Extra case feeders can be purchased to be...

This factory collect style die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp...

Lee's large cutter with lock stud is used for.480 ruger,.500 s&w and the.50 bmg (for.475 and larger).The large cutter can also be used with all case diameters smaller than.475.Capacity: 1...

Lee 260 rem case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.015 to 2.035 inches.Type: Case Length...

Lee 338 lapua case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud.Trim to length 2.706 to 2.726 inches.Capacity: 1Type: Case Length...

Lee's double cavity ball mold produces a ball in the specified size suitable for muzzleloaders.Round ball molds with double cavity and handles have a tangential cut off which eliminates the...

Lee 38 special case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 1.135 to 1.155 inches.Capacity: 1...

Lee's collet die uses a collet to squeeze a mandrel, creating a precisely aligned case neck while reducing run out.Sizes just the neck and requires no lubrication.Type: Collet Neck Sizing Rifle...

Lee 300 wsm case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.080 to 2.100 inches.Capacity: 1...

The lee taper crimp dies hardened steel designed to overcome crimp problems caused by poor die design.These dies offer little or no advantage when used with 1986 or newer lee dies as the crimp angle...

Grips the shell for a firm fit in the press during reloading or priming operations.Will fit the auto prime and auto prime ii.Capacity: 1 CasingType: Shell HolderCaliber: 500 S&WSize: #16Quantity:...

Lee 41 mag case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 1.270 to 1.290 inches.Capacity: 1...

Lee's pacesetter 3-die set includes a full length sizing die, easy adjust dead length bullet seating die, factory crimp die, universal shell holder, powder dipper and instructions/load data.Type:...

Lee 300 h&h and 300 remington ultra mag case length gauge is a precise, easy way to trim to length and square the case mouth.Used with the cutter and lock stud or zip trim.Trim to length 2.820 to...

Lee's resizing lube is non sticky, non allergenic and pleasant to handle.Eliminates stuck and dented cases and makes sizing less work.Capacity: 2 ozType: LubeCaliber: Multi-CaliberSize: 2 ozQuantity:...