LEE

Lee's pacesetter 3-die set includes a full length sizing die, easy adjust dead length bullet seating die, factory crimp die, universal shell holder, powder dipper and instructions/load data.Type:...

Lee's collet die uses a collet to squeeze a mandrel, creating a precisely aligned case neck while reducing run out.Sizes just the neck and requires no lubrication.Type: Collet Neck Sizing Rifle...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the...

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1...

Works with cartridge: 45 auto rim.Type: Shell PlateCaliber: 45 Auto RimSize: #13Weight: 0.28 lbsMaterial: Steel

Lee 90125 quick trim pistol 44 rem magType: Quick Trim DieCaliber: 44 Rem MagDie Type: TrimmerDie Series: Quick TrimIn Set: 1Shell Holder: No

Lee's rgb (really great buy) series consists of the full length sizing die, dead length easy adjust bullet seating die, and instructions.These dies produce factory-dimensioned ammo to reliably fit...

Lee's carbide factory crimp die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability.This die applies a roll style crimp.The adjusting...

Lee's pacesetter 2-die set includes full length sizing die, bullet seating die, universal shell holder and instructions/load data.Type: Pacesetter Rifle Dies w/Shell HolderCaliber: 32-40 WinDie...

A large, unbreakable funnel that fits all cases from.22 to.45 caliber and contains a hole in the flange that permits mounting to the lee turret press, shelf or bench.Type: Powder MeasureCaliber:...

Lee ultimate rifle 4 die set 22-250 remType: 4-Die SetCaliber: 22-250 RemDie Type: 4-Die SetDie Series: Ultimate Rifle SetIn Set: 4Shell Holder: Included

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1...

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1...

Lee 90732 pacesetter 3-die set 7.65x53mm argentineType: Pacesetter Rifle Dies w/Shell HolderCaliber: 7.65x53mm ArgentineDie Type: 3-Die SetDie Series: PacesetterIn Set: 3Metal Type: SteelShell...

The breech lock hand press is a full size reloading press with an overall length of 11.5".It gives you plenty of stroke with lots of power to handle the largest magnum cartridges.One breech lock...

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the...

Lee's slug mold features the exclusive drive key which positively rotates the slug in rifled shotgun barrels.It doubles as a support rib allowing use of a standard trap wad with no need for a support...

Lee's carbide 3-die set includes carbide full length sizing die, powder thru expanding die, universal shell holder, powder dipper and instructions/load data.Type: Carbide 3-Die Set PistolCaliber: 41...

Grips the shell for a firm fit in the press during reloading or priming operations.Universal shell holder used in most brands of reloading presses.Not for use with the auto-prime.Capacity: 1...

Works with cartridges: 222, 223, 380 auto, 32 s&w long, 32 h&r magnum.Type: Shell PlateCaliber: 223 RemSize: #4Weight: 0.28 lbsMaterial: Steel

This factory die incorporates a collet to apply a rifle type crimp to the case, which makes these very difficult to crimp cartridges a delight to reload.Bullets do not need a crimp groove, as the...

Lee 90733 pacesetter 3-die set 7.7 japaneseType: Pacesetter Rifle Dies w/Shell HolderCaliber: 7.7 JapaneseDie Type: 3-Die SetDie Series: PacesetterIn Set: 3Metal Type: SteelShell Holder: Included

Quick change shell plates allow you to change from one caliber to another in a matter of minutes.When changing to another caliber with a different primer size, be sure to order the pro 1000 primer...